Which Material Is Good For The Kitchen Cabinet?

- Apr 02, 2019-

1, particle board

Particleboard is a commonly used substrate material for kitchen cabinets. It is a thin sheet made of wood scrap as the main raw material, infiltrated with glue and additives. According to the pressing method, it can be divided into two types: extruded particle board and flat particle board. Generally, particleboard is affixed with melamine, veneer, and the like.

The advantage is that it is not easy to be deformed and has strong nail holding power. The characteristic particleboard has thermal insulation and sound absorbing performance, and the environmental protection factor is much higher than that of the density board. It is very good for kitchen cabinet making. The disadvantage is that the particle board is not easy to be bent or curved, and the processing machinery is highly demanded.

2, solid wood board

Solid wood kitchen cabinets are not only environmentally friendly but also beautiful. They are mainly made of cherry wood, walnut, and oak. They can be used for bump molding and exterior painting, and can retain natural wood color. This kind of material can be used for kitchen cabinets that want to be noble. However, the price is generally more expensive, even solid wood composite doors are more expensive.

3, fire board

The substrate of the fireproof kitchen cabinet is a particle board or a density board, and the surface is decorated with a fireproof board. The advantages are rich in color, scratch resistant, economical, beautiful and practical. The disadvantage is that the door panel is flat and needs to be edged, and can not create three-dimensional effects such as bumps and metal, and the fashion aesthetic is poor. It is also prone to degumming and deformation.

4, melamine board

Melamine sheets, also known as double veneers, are fire- and water-repellent panels that are suitable for use in wet kitchens. The advantage is that the color is bright and resistant to general corrosion, but the grade may be a bit low.

5, stainless steel plate

Stainless steel kitchen cabinets look modern and have the advantage of being easy to clean. Disadvantages The manufacturing process is complicated, the cost is high, and it is easy to scratch during daily use. Therefore, there are fewer and fewer stainless steel kitchen cabinets on the market today.

6, plastic plate

The plastic kitchen cabinet is made of a seamless PVC film forming process, which is waterproof and moisture-proof, but cannot withstand high temperature and will gradually deform after long-term use.

7, plexiglass

The plexiglass kitchen cabinets are very high-grade, visually beautiful and comfortable. The advantages are good anti-aging performance, high plasticity, rich colors and environmental protection. The disadvantages are high hardness and difficulty in construction.

8, baking varnish

The lacquered board kitchen cabinet is made of MDF and the surface is fired at high temperature. The lacquered kitchen cabinets are very beautiful and gorgeous. The disadvantage is that the process level is high, otherwise it is easy to change color, so the price is high. The use of lacquered kitchen cabinets requires careful care to avoid bumps and scratches. It is difficult to repair damage and often requires an overall replacement.

9, UV board

The UV board is a surface protected by UV paint. The UV paint is UV-curable paint. The surface is treated with bright light and bright color. It can give a strong visual impact, wear resistance, chemical resistance and long service life. No discoloration, easy to clean, high hardness, acid and alkali resistance.